Engineered programmes for every water system
For each utility we map the operating challenges your plant faces — then prescribe the chemistry, dosing and monitoring strategy that resolves them. Below is the consultative view of every programme we deliver.
Reverse Osmosis Solutions
High-purity antiscalants, biocides and membrane cleaners that protect RO membranes from scaling, fouling and microbial attack — even on high-TDS feedwater.
- • Scale formation on membrane surfaces from calcium, silica and bicarbonate salts
- • Membrane fouling caused by silt, colloids and inorganic deposits
- • Bacterial and biological growth reducing flux and membrane life
- • OSMOTREAT-Z11 antiscalant for high-TDS feedwater
- • BIOCIDE-ZTR & BIOCIDE-ZTT for oxidising and non-oxidising microbial control
- • OSMOCLEANER-RT7 / RT8 alkaline and acidic membrane cleaners
Cooling Tower Treatment
Engineered chemistries that prevent scaling, corrosion and biological fouling in open recirculating cooling systems.
- • Scale build-up from calcium, magnesium and silica salts
- • Corrosion of mild steel, copper and galvanised surfaces
- • Biological fouling, biofilm and Legionella risk
- • CTA-Z11 antiscalant and corrosion inhibitor for open cooling towers
- • Biodispersant — non-oxidising polymer that breaks biofilm and slime
- • Programmed dosing and weekly performance review
Boiler Water Treatment
Complete boiler programmes that protect against scale, oxygen pitting and carryover, extending tube life and improving steam quality.
- • Oxygen attack and pitting corrosion in feedwater lines
- • Scale formation on boiler tubes reducing heat transfer
- • Caustic embrittlement and steam carryover
- • EECI-Z11 boiler scale and corrosion inhibitor
- • EECS-Z11 oxygen scavenger for deaerator and feedline protection
- • Blowdown optimisation and condensate return treatment
Chiller Water Treatment
Closed-loop chemistries for chilled and hot-water circuits that preserve heat transfer and prevent corrosion across copper, steel and brass.
- • Corrosion of mixed metallurgy in closed loops
- • Scaling that degrades heat transfer efficiency
- • Microbial growth in low-flow zones
- • CCAC-Z11 chiller antiscalant and corrosion inhibitor
- • Glycol compatibility checks and side-stream filtration guidance
- • Quarterly water analysis and inhibitor top-up programme
Wastewater Treatment
Antifoam, coagulant and process chemistries that improve discharge quality, reduce downtime and keep effluent within regulatory limits.
- • Excessive foaming in aeration and equalisation tanks
- • Process inefficiency and unstable TSS / COD removal
- • Operator-intensive corrective dosing
- • LACONIC-SBN silicone-based antifoam for rapid foam knock-down
- • Customised coagulant / flocculant selection
- • Discharge-compliance monitoring support
Not sure which programme fits your plant?
Send us your feed-water analysis and a brief on your system — we'll come back with a tailored recommendation.